I turned the wind-tunnel on its side and hung the plate vertically as shown in the photograph.
These graphs show that my mixed convection model is successful from natural through forced convection for horizontal and vertical rough plates with forced flow perpendicular to the natural flow. The leftmost red dot in each graph is the natural convection (Re=0) for that orientation; it is placed at Re=1000 so that it can appear on the graph.
The L4-norm for downward convection indicates that the interaction between the downward mode and forced convection is more competitive than the fairly cooperative L2-norm of the vertical and upward modes.
Horizontal downward and vertical natural convection from the rough plate match that expected from a smooth plate. Horizontal upward convection matches assuming that the upper (rough) surface convection is reduced by 93% of the non-forced convection from the four adjoining sides. In order to test if horizontal upward convection is the same for rough and smooth, I will cover the rough surface with a flat sheet of aluminum and repeat the test.
I have started writing a paper titled "Mixed Convection from a Rough Plate". Which journal should I submit it to?
Governance by those who do the work.
- ▼ 2016 (9)
- ► 2015 (17)
- ► 2011 (13)
- ► 2010 (13)